The "SMART" Way To Protect & Save
No Complicated Installation
Will my savings go up the more units I buy and use?
I have heard of other units that people have bought that really did nothing. Why is yours better?
Do I need a qualified electrician to install the unit?
Is there any chance it will damage my appliances and/or sensitive equipment?
So I will save on my electricity for my whole house?
How long will it take the "SMART" PPS Professional Power Saver to pay for itself?
Why haven't I heard about these units before now?
How do I know this idea will really work?
I still do not understand how I can save or really how this unit works to save me electricity
Should I buy all new appliances to save more electricity?
Are these environmental friendly?
Will this make my T.V. picture better?
Will the PPS™ Professional Power Saver definitely reduce my electricity bill?
What kind of certification process have you put this unit through?
Do you have good certifications?
Does it require any maintenance?
Do I need to make any changes to the electrical wiring?
What is the ROI (Return on Investment) of the unit?
Do I leave it on all the time?
Do I save more with more units installed?
How do the Utility Companys' benefit and do they agree with this concept?
Does the PPS™ "SMART" Power Saver work with the Smart Meters?
Are Power Savers Safe? Absolutely. Our "SMART" PPS Professional Power Savers have been certified by special laboratories recognized by each country. This certification is your assurance our product is Electronically Safe and that it performs as described and meets the Green Earth and Cleaner Environment Compliance. Back to Top
Will my savings go up the more units I buy and use? No. The "SMART" Way is to have one PPS unit Hardwired to each panel box or one unit for each line. In fact it is important not to use too large a capacitor – meaning the best average range is our 60uF with 80uF being the maximum. And you will only want to have each of your lines protected. (The number of lines in a home varies between 220 and 240 voltage and from country to country.) Back to Top
Why are you saying my savings will be from 10% to 15% when other products say I can save 50% and more?
It is not possible to save more than 30% in the perfect application without your own efforts at reducing your "Consumption Habits". Any saving figures quoted above 30% is simply not true. Our units have been tested threefold. We have received savings above 15% but we do not quote that figure. Everything about our product and sales material is always honest and often times understated. We are just as excited about the Working Life Extension of your motors/appliances as we are about electricity savings. This is a Win – Win – Win Unit
1. Win for Extended Motor Life
2. Win for Spikes, Surges, Harmonics, Line Noise and EMF Protection
3. Win for raising the Power Factor for Savings.
Back to Top
I have heard of other units that people have bought that really did nothing. Why is yours better? The other plug-in units on the market are using a much smaller and ineffective capacitor. Not only is it too small but it is actually quite unsafe and will not last long. We are using state-of-the-art components with capacitors the proper size to make a difference. This is verified by our List of Certification Approvals (see Certifications).Back to Top
How long will they last? Capacitors are known to work for many years and we have an absolute guarantee to totally replace the unit within 5 years if it does not work (see guarantee). We only use exceptionally high quality components, strict manufacturing standards and with no moving parts our "SMART" PPS units have a estimated life span of 20 to 25 years.Back to Top
Do I need a qualified electrician to install the unit? No. If you are simply going to plug one into each line in your house. Yes If you want to hardwire the unit into your house for more savings.Back to Top
Is there any chance it will damage my appliances and/or sensitive equipment? Absolutely not. In fact, the actual working life of motors have been known to increase by 10 to 15%. This feature alone pays for the unit the minute it is plugged in.Back to Top
So I will save on my electricity for my whole house? No. There are two type of electricity we are referring to here. Resistive – anything that creates heat or runs without a motor or transformer/transistor and Inductive – anything that runs on a motor or generates power or works with a transformer/transistor. "SMART" PPS Power Savers, and all power savers for that matter, only work with Inductive loads. Resistive electricity already works at the best PF level.Back to Top
Can you explain in simple terms what your unit does with the electricity?
Yes.
1. For Surges, Spikes and Lightning our units actually absorb the impulse energy/power in the capacitors before it can reach your motors, appliances and expensive equipment and do damage.
2. For EMF – our unit actually stores the extra power and reduces the harmonics that would normally go into the motor to over-heat,
over-work it and over-create EMF radiation.
3. For Wasted Electricity – Our unit actually pushes power to the motor and pulls back what the motor does not immediately use, stores the electricity and then pushes it back to the motor. Without our unit this is where electricity is paid for and wasted.
4. This process reduces heat on the lines, reduces the strain on electrical components and will Increase the working life of the equipment/motors.
Back to Top
How long will it take the "SMART" PPS Professional Power Saver to pay for itself? For savings on your motor life, EMF reduction and Surge, Spike and Lightning Protection – Immediately.
For savings from your electrical charges it can depend upon several things:
- The size of your house,
- How many Inductive loads you use,
- If you use the plug-in application or hardwire into the breaker/panel box,
- Your personal power saving habits,
- Whether you have a plug-in unit for each line,
- Immediately when adding up the savings on Increased Motor Life.
Back to Top
Why haven't I heard about these units before now? Two words – cost effectiveness. Until recently we were able to handle the local power rates. But it seems that the charges are constantly going up. And still these units are not being offered by the government or power companies, in fact, there is not even any advertising coming out from them. The big push now is to force even more sophisticated monitoring equipment into our homes to increase their charges not to save us money. Back to Top
How do I know this idea will really work?
1. This technology has been used by industry and utility companies for years, but until recently it was not practical nor affordable for homeowners use.
2. There have been many products claiming fantastic results that were not possible but now the
Very Act of Passing Certification is your guarantee of our quality, safety, and results.
Back to Top
What is wasted electricity?
1. One example is "electronic noise" generated by electronic devices and actually is harmful to the device. This wasteful electronic noise drains more wattage than it uses, adding unnecessarily to your electric bill.
2. Then there are spikes and surges which occur by the hundreds every day. These spikes and surges shorten the lifespan of your valuable and sensitive electronic equipment.
3. Apparent Power versus Real Power used. This is the power motors/appliances call for when they "rev-up or start up" but only use a portion of the electricity sent to them. This is the extra or wasted electricity which is captured by the capacitors and recycled for use.
Back to Top
I still do not understand how I can save or really how this unit works to save me electricity? It makes the current and the voltage move closer together so they work more efficently. This allows your equipment and appliances to do the same functions but requiring less electricity. The power saver reduces or narrows the phase difference between the current and voltage so everything works smoother. This is in addition to removing much of the energy wasting line noise or harmonics. Back to Top
Should I buy all new appliances to save more electricity? Energy saving modern appliances will of course save you electricity usage. But if the appliances you have now do not need replacing or you do not want to extend that expense the PPS Professional Power Saver is the SMARTEST answer. Back to Top
Are these environmental friendly? Yes. We have achieved the Approval of 7 Certification Agencies of which two are directly related to Green Earth, Environmental Friendly and Clean Air. We also like to think they are in that the more energy we can save the more we contribute to the environment and the greater the difference we make. Back to Top
Will this make my T.V. picture better? Well, that is a difficult answer to give not knowing the conditions of your equipment. But the SMART way to prolong the life of your appliances and electronics is by reducing the electrical "noise". Examples of this type of noise is the "hum" of a florescent lamp, or coming from the power lines, or it can be the snow you see when the T.V. produces a weak signal. The PPS™ Power Saver does not work through the cable or telephone lines. Back to Top
Will the PPS™ Professional Power Saver definitely reduce my electricity bill? Yes. This is basic upon customer's feedback in three different countries. The average range of savings is 10% to 15%. But these percentages are individual savings and there are many variable involved. In the case of 3-phase PPS™ units the savings are in the mid- to high-twenties. Three-phase is a commercial application not residential. Back to Top
Why are you not quoting the higher saving percentages that I see on the internet, like 30%, to over 50%? Because these percentages are not possible with just a power saving unit. The actual physics and math in Electrical Engineering to save power through capacitance is a normal maximum of 30%. Any higher savings will depend upon your own personal power saving habits. Back to Top
What kind of certification process have you put this unit through? CE, C E, RoHs, EMC, LVD, SABS, SAA, NOM/NYCE. Back to Top
Do you have good certifications?
Yes. SAA for Australia, SABS for South Africa, NOM/NYCE for Mexico, and CE, EMC, LVD, RoHs for Europe and Environment Issues and Standards.
Listed below are just some of the stringent testing procedures PPS™ Professional Power Savers have been put through:
1. Power Line Conducted Emission Measurements Test
2. Voltage Fluctuation and Flicker Measurements Tests
3. Surge Tests
4. RF Field Strength Susceptibility Tests
5. Radiation Emission Measurements Test
6. Harmonic Current Emission Measurements Test
7. Electrostatic Discharge Test
8. Voltage Dips and Interruptions Tests
9. Injected Currents Susceptibility Tests
10. Electricity Transient Test
11. Heat Test
12. Electric Strength Test
13. Leakage Current Measurements
Back to Top
Does it require any maintenance? No. Once it is operational forget about it. In fact it is best to hang it or place it in a spot where you will not notice it and just let it work. Back to Top
Do I need to make any changes to the electrical wiring? For plug-in application absolutely not. Simply plug the unit into a socket and do not use an extension cord. For hardwiring you will need to consult with an electrician. Normally everything you need is with the unit and in the breaker box with the exception of needing a Double Poled 20 or 30 amp breaker for installation. Back to Top
Which units will I need?
We only have two units to choose from. Since the best range for saving energy is narrow we have only manufactured units that will work SMART with the best efficiency and we do not offer a variety of outer casing designs. You do not want it to be pretty, you want it to just do the job and forget about it.
You will either be needing a single-phase or a three-phase unit. Most homes will only use single-phase where commercial application, i.e., businesses and offices generally have 3-phase wiring.
Back to Top
How long is your warranty?
We do not have a warranty. We have a 5 Year Total Replacement Guarantee (see Guarantee). This way there are No Limitation, No Terms or Conditions where only certain elements are covered and the customer has to package and mail the unit back, wait for repairs and have it returned.
Let me ask you this -- How can you save electricity if the unit is in for repair? You want to save money every minute of every day.
Back to Top
What is the ROI (Return on Investment) of the unit? This answer will vary according to your personal energy consuming habits. But when you add in the savings from the Increased Motor Working Life the unit is paid for the minute you plug it in. After that all the savings are free for years to come regardless of electrical price increases. Back to Top
Do I leave it on all the time? Absolutely Yes. How can you be protected and save when it is off? Back to Top
Do I save more with more units installed? No. By having too many units you could actually increase your electricity charges. There are solid rules about the amount of capacitance you should have on each line of your house or in your house total. And considering the variance of 5% we have found that you would never want more than 80uF on an individual line or hardwired to the panel box. And unless there are extra-ordinary circumstances we recommend a 60uF..Back to Top
How do the Utility Companys' benefit and do they agree with this concept? We all must begin making a difference in our world. If the utility companys can deliver more electricity without building another power plant or depending upon foreign oil, or burning more fossil fuels everyone benefits from Saving Power, Using Power More Efficiently, and Spending Less for Replacement Equipment. Back to Top
Does the PPS™ "SMART" Power Saver work with the Smart Meters?
1. Absolutely. In fact if you are smart it should be mandatory. If there has ever been a time for an Honest Power Saving Device, a time for the "SMART" Power Saver- It Is NOW.
2. The whole idea of the utility companies installing Smart Meters for the benefit of the consumer is smoke and mirrors. It is to make them more money. These units will be able to monitor usage far closer than they have ever been monitored before.
Back to Top